Or, you could just do it correctly and pull the axle out. It's not that
difficult to do and, in the end, you have made no modifications or compromises.
I can understand why you would not want to have to pull the axle, but always
remember...there's the quick way, and then there's the right way, and rarely do
the two meet.
Best of luck,
Andy Walker
Edmond, OK
B382001600LRXFE
TAC #740
---- Owain Lloyd <owain.lloyd@gmail.com> wrote:
> I sent this to Steve yesterday
>
>
> Begin forwarded message:
>
> > From: Owain Lloyd <owain.lloyd@gmail.com>
> > Date: January 13, 2011 23:24:05 EST
> > To: sjhcobra1@cs.com
> > Subject: Re: [Tigers] Replacing a rear wheel lug stud
> > Reply-To: owain.lloyd@gmail.com
> >
>
> > removing the old one is easy, just cut it shorter and tap it one.
> >
> > to insert a new one, you can cut a v from the axle flange with a
> > hacksaw and then cut a flat on part of the head of the new stud. then
> > there is enough space to get it in.
> >
> > On Thu, Jan 13, 2011 at 6:32 PM, <sjhcobra1@cs.com> wrote:
> >> Does anyone have a tip on how to replace a rear wheel lug stud on a Tiger
> >> without pulling the axle?
> >> ?
> >> Steve Halbrook
> >> _______________________________________________
> >> Tigers@autox.team.net
> >> Donate: http://www.team.net/donate.html
> >> Archive: http://www.team.net/archive
> >> Forums: http://www.team.net/forums
> >> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/owain.lloyd@gmail.com
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/tigers/awtiger@cox.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|