That is what you need, you bolt 3 bolts into the balancer, then with the center
scew you tighten it up and it pushes out the balancer. It should look like a
think with 3 or 4 slots and a long center bolt.
http://www.amazon.com/Silver-Seal-Harmonic-Balancer-Puller/dp/B002YOUTK6/ref=sr_1_4?ie=UTF8&qid=1304730250&sr=8-4
That should be what it looks like.
Sandy
________________________________
From: Jeff Holt <jeff.holt7@gmail.com>
To: Tiger List <tigers@autox.team.net>
Sent: Fri, May 6, 2011 4:40:38 PM
Subject: [Tigers] Puller
Now I need to pull the pulley vibration damper out to get the front cover off.
I need to get a "puller," so I went to O'Reilly and they sold me a Harmonic
Balancer Puller. They insisted. I'm not sure. The center pivot thing looks
like it's pushing from the center as opposed to pushing from the sides.
Any thoughts? Maybe online parts stores are where it's at these days.
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/sganz@pacbell.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|