Re: [Tigers] to fill or not to fill

[michael king <michael.s.king@gmail.com>]

The MKI Tigers with round corner doors and bonnet have the seams on
the front and rear scuttle filled and the rear seam on the sill
filled. The front sill joint at the leading edge of the door is not
filled.

On the MKIA and MKII the front scuttle is not filled and neither are
the sill joints, the rear scuttle is still filled.

As for is you should.. well all SI-3 Alpines had all the joints
filled, i think they stopped filling joints on the square cornered
cars as the lines align to the panels, where as on the round corner
cars they would look odd.. some say cost cutting, i think it also has
to do with the change in panel edge...

either way.. do it correct if you want.. or as you like if you feel like it!

-- 
Regards

Michael King
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net