Torque them to 70lbs when you check air pressures, it takes less than a
min per wheel. Use a star pattern.
Michael Shortt
On Jul 28, 2013 3:02 PM, "Robert D. Hogan" <robertdhogan@gmail.com> wrote:
> Is there a mechanical part resembling a connected dual hole metal strip
> with
> bend tabs for retention of hex lug nut position and anti-rotation? Short
> of
> using a Loctite thread bond or safety wiring two lug nuts together, how
> could lug nuts best be secured?
>
>
>
> -----Original Message-----
> From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
> On Behalf Of Paul R Sheahan
> Sent: Sunday, July 28, 2013 2:49 PM
> To: tigers@autox.team.net
> Subject: [Tigers] Semi Annual Lug Nut Tightning Event
>
> It's that time of the year for all of us to avoid the loose or lost wheels.
> I remind everyone to check the lugs on your wheels. I almost lost a wheel
> several years ago because I forgot to check. Save yourself a lot of
> misery.
>
> Check them out........
>
> Paul R Sheahan
> The Paul R. Sheahan Company
> (239)732-1704 Office
> (704)564-3831 Cell
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/robertdhogan@gmail.com
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/michael@michaelshortt.com
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|