I can't imagine an ots (off the shelf) scoop that wouldn't look really
awkward. It might make sense to talk to someone like a Steve Alcala about doing
some type of "power bulge", such as MG used to fit the six cylinder in the
In a message dated 8/22/2013 5:54:44 P.M. Pacific Daylight Time,
It's a clearance issue. The air cleaner is about 16" wide so I need a
scoop at least that wide.
In a message dated 8/22/2013 8:44:35 P.M. Eastern Daylight Time,
when you say fit over the stock tiger air cleaner.. i'm a little
confused... Is the stock cleaner touching the bonnet? If so it will touch
extremities before it touches the center of the bonnet where the hoods
you needed one to clear the "width" of the cleaner.. that would be a VERY
is this a thing for looks.. or to solve a clearance issue?
On 23 August 2013 01:16, <_CoolVT@aol.com_ (mailto:CoolVT@aol.com) > wrote:
Looking for a metal hood scoop that will fit over the stock Tiger air
cleaner. There are plenty of plastic and fiberglass models, but having
time finding one in metal. Any ideas?
Thanks, Mark L