tigers
[Top] [All Lists]

[Tigers] Fwd: Re: Aluminum radiators

To: tigers@autox.team.net
Subject: [Tigers] Fwd: Re: Aluminum radiators
From: <awtiger@cox.net>
Date: Tue, 17 Dec 2013 17:11:55 -0500
Authentication-results: cox.net; none
Delivered-to: mharc@autox.team.net
Delivered-to: tigers@autox.team.net
Sensitivity: Normal
Guys:

Thanks for all the responses on the radiator.  Gene Padgett sent me one that he 
wanted passed along to the group and, since his reply-to-all function isn't 
working on his computer, he asked me if I would do it for him.  So, here you 
go...

Andy

> Date: Tue, 17 Dec 2013 21:07:22 +0000 (UTC)
> From: genepadgett@comcast.net
> To: Andy Walker <awtiger@cox.net>
> Subject: Re: [Tigers] Aluminum radiators
> 
> Andy, for some reason, my reply to all function is not working. It does not 
> like the tigers liss address in the cc space. I would like to share the info 
> I sent you with everyone on the list. Would you please try to pass it along? 
> Thanks, Gene 
> 
> ----- Original Message -----
> From: genepadgett@comcast.net 
> To: "Andy Walker" <awtiger@cox.net> 
> Sent: Tuesday, December 17, 2013 3:54:53 PM 
> Subject: Re: [Tigers] Aluminum radiators 
> 
> 
> 
> 
> 
> Hi Andy, 
> 
> 
> I bought a Griffin a couple of years ago. I only got around to installing it 
> a few months ago and have not yet driven the car with it installed. However I 
> did have some issues. 
> 
> 
> Apparently Griffin has a couple of designs for the Tiger that they can use. 
> Somehow we must have agreed to use the "racing" version based on specs 
> received from someone. I am thinking it may have been someone they referred 
> to as "Tiger Tom" but am not sure. 
> 
> 
> Anyway, when I finally got around to installing it, I found it had no drain 
> plug. Also, the side mounting flanges were welded flush with the front of the 
> radiator. When I called them about these issues they said they explained the 
> whole racing version thing, which matched the number on my box. They offered 
> to install a drain plug for me free if I sent it back but I did not want to 
> incur the shipping charges. As for the forward positioned mounting flanges, I 
> just made some 1/4 inch spacers to take up the gap between the flanges and 
> the body work. Since everything is aluminum, I did not want to just tighten 
> the mounting bolts down hard and still have a gap at that mounting flange 
> ear. 
> 
> 
> The person I talked to two years ago and again this year was a guy named 
> "Benji". 
> 
> 
> As for the radiator otherwise, I looks exactly like the stock one, even down 
> to the elbow connection for the top overflow hose connection. It comes in 
> bare aluminum, but I painted it with Eastwood's special purpose high temp 
> gloss radiator paint. Looks great, very stock and as others have said, the 
> shroud fits nicely. 
> 
> 
> Gene 
> ----- Original Message -----
> n the stock fan shroud without 
> any modifications. Is this possible? Can someone point me toward the place 
> where I could get one of these jewels? 
> 
> 
> 
> Thanks a million, 
> 
> Andy Walker 
> 
> Edmond, OK 
> 
> B382001600LRXFE 
> 
> TAC #740 
> _______________________________________________ 
> 
> tigers@autox.team.net 
> 
> Donate: http://www.team.net/donate.html 
> Archive: http://www.team.net/archive 
> Forums: http://www.team.net/forums 
> Unsubscribe: 
> http://autox.team.net/mailman/options/tigers/genepadgett@comcast.net 
_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>
  • [Tigers] Fwd: Re: Aluminum radiators, awtiger <=