The toggle switches should be off when at the top facing the sky... On when
down. For some reason in the states when people restore them they reverse
it... I assume this has to do with way house light switches are oriented to
work in homes stateside. If you look at road test pics stateside cars still
had switched up for off when new
On 7 August 2014 08:48, Jim McLaughlin <jimmc13@socket.net> wrote:
> Folks:
>
>
>
> Okay so I am working on my heater valve and the shut off cable. In order
> to
> route the cable properly I had to remove the heater box, so I thought I'd
> clean it. Then I dropped it and it broke what a clumsy move.
>
>
>
> When removing the box, I had to disconnect the heater switch wires that are
> routed to the 2-speed resistor. The service manual lists the off position
> as up and then low speed in the middle and fast speed as all the way down.
> Every Sunbeam I have ever had all switches off in the down position. This
> actually seemed safer when driving.
>
>
>
> What is the correct off switch position for each of the switches, up or
> down? Anybody have a spare Smiths heater box?
>
>
>
> Jim McLaughlin
>
> B382000175LRXFE
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/michael.s.king@gmail.com
>
>
>
--
Regards
Michael King
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|