tigers
[Top] [All Lists]

Re: [Tigers] Vinyl dash

To: Gary <garywinblad@comcast.net>
Subject: Re: [Tigers] Vinyl dash
From: Jeffery Randall via Tigers <tigers@autox.team.net>
Date: Mon, 26 Jan 2015 06:48:38 -0500
Cc: "tigers@autox.team.net" <tigers@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: tigers@autox.team.net
References: <640E42D77D8C4C9B990ECB978C98D3E7@ronpc1> <1339641847.10267961.1422207089332.JavaMail.zimbra@comcast.net> <CAGiVA4Zjz4B6JGDugA9yRYWMNwAGVB2DWF7+EFGSgz7zmiqxuw@mail.gmail.com> <BAD83D91-A251-4EEA-9DC8-E65C9D8D2C4F@comcast.net>
Thanks,
   Jeff

On Sun, Jan 25, 2015 at 7:28 PM, Gary <garywinblad@comcast.net> wrote:

> According to TBON, approximately
> B9470400.
> Gary
>
> Sent from my iPhone
>
> On Jan 25, 2015, at 3:19 PM, Jeffery Randall <jefferyrandall@gmail.com>
> wrote:
>
> Being too lazy to start a new thread, would any of you's guys know what
> the cut off is for vinyl dash on early mk1s. I thought it was 331 but not
> sure. Thanks
>    Jeff
>
> On Sun, Jan 25, 2015 at 12:31 PM, Gary Winblad via Tigers <
> tigers@autox.team.net> wrote:
>
>> And I might add..
>>
>> B9470622 does have both of these from the factory..
>> Gary
>>
>> ----- Original Message -----
>> From: Ron Fraser via Tigers <tigers@autox.team.net>
>> To: awtiger@cox.net, tigers@autox.team.net
>> Sent: Sun, 25 Jan 2015 16:09:28 -0000 (UTC)
>> Subject: Re: [Tigers] Need a couple of washers
>>
>> Andy
>>         I did not see if you got help with these.
>>
>> DC washer = double coil spring washer
>>
>> If you Google that name a number of sites pop up and hopefully one of them
>> sells them.
>>
>> Ron Fraser
>>
>> -----Original Message-----
>> From: Tigers [mailto:tigers-bounces@autox.team.net] On Behalf Of
>> awtiger---
>> via Tigers
>> Sent: Thursday, January 22, 2015 11:56 AM
>> To: tigers@autox.team.net
>> Subject: [Tigers] Need a couple of washers
>>
>>
>> Hey, guys:
>>
>> Does anyone out there have a couple of what the parts book calls "D.C."
>> washers (double-coil)?  Specifically, I'm looking for the D.C. washer that
>> goes on the hood prop where it hooks to its swivel point on the car (I
>> think
>> this one is 5/16" in I.D.).  Also, isn't there one of these that's
>> supposed
>> to go on the hood latch mechanism under the pull rod slide that keeps the
>> slide at the correct height?  I would swear I've seen them on there before
>> on Tigers and Alpines but my car didn't have one and I can't find one in
>> the
>> parts book.
>>
>> Bottom line is that I am for sure in need of the one that goes on the prop
>> rod and, if there is supposed to be one on the hood latch mechanism, then
>> I
>> need it as well.  As usual, I appreciate any assistance.
>>
>> BTW...the engine & trans combo is finally going back in the car on
>> Saturday.
>> Wish me good luck!!!!!
>>
>> Thanks,
>> Andy Walker
>> Edmond, OK
>> B382001600LRXFE
>> TAC #740
>> _______________________________________________
>>
>> tigers@autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/jefferyrandall@gmail.com
_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>