tigers
[Top] [All Lists]

Re: [Tigers] Carburetor input

To: H B Elam <harryb@elams.org>
Subject: Re: [Tigers] Carburetor input
From: Gary via Tigers <tigers@autox.team.net>
Date: Wed, 21 Apr 2021 14:48:16 -0700
Cc: Tigers@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: tigers@autox.team.net
References: <E15EE52E-D983-413F-82CF-FEC357E20B77@elams.org>
Harry,
What kind of check valves?
Photos?
Thanks,
Gary


Sent from my iPhone

> On Apr 21, 2021, at 2:09 PM, H B Elam via Tigers <tigers@autox.team.net> 
> wrote:
> 
> Hi all!
> I have had elex fuel pump problems since 1964 & an MGA. In my Tiger I have 
> two pumps piped in parallel. There is no shifting valve as both have check 
> valves. I only shift them electrically. The stock SU idles at 3.5 psi and the 
> aftermarket at 4.2 psi. While I really can not notice any performance change 
> I only use the aftermarket for troubles or autocrossing. The issue is not the 
> carb but the float valve. My research indicated that most float valves are 
> good for 7 psi. 
> 
> Harry Elam
> B382000471
> _______________________________________________
> 
> tigers@autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
> Unsubscribe: 
> http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
> 
> 

_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>