Re: TR250 shifter

[JoeSimcoe@aol.com]

Chris,

Assuming that you indeed mean just the shifter - mine came out of my TR250 by
removing the ONE bolt from the backside (side toward the rear of the car)
then removing TWO side bolts, one on each side that screw in to meet a groove
on each side of the shifter.  These bolts then have a nut that tightens down
to keep them in place.

>From the sound of it, you don't have original equipment or I don't :-)

Let me know if you want to discuss further.

JoeSImcoe

74 TR6 
68 TR250

Baton Rouge LA