triumphs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: tr3 camber

from [JHarroun] [Permanent Link][Original]
To: s_malone@metro.net, triumphs@autox.team.net
Subject: Re: tr3 camber
From: JHarroun@aol.com
Date: Mon, 2 Dec 1996 10:48:23 -0500 
Steve,
>From what I've read, except for toe-in, if the alignment is out on a TR-3,
something is worn, or bent.  There is no adjustment of such things as camber.
  I've broken the lower a-frame brackets off the frame by just running into a
curb!  Good hunting!

Jim
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • Re: tr3 camber, JHarroun <=
Previous by Date:  TR3 Frame ???, ron botting
Next by Date:  Re: Oil feed lines (was Engine Oil), Charles Y. Farwell
Previous by Thread:  TR3 Frame ???, ron botting
Next by Thread:  Re: Oil feed lines (was Engine Oil), Charles Y. Farwell
Indexes:  [Date] [Thread] [Top] [All Lists]