On Wed, 05 Feb 1997 21:02:01 +0000 Glenn Franco <gfranco@provide.net>
writes:
>I just purchased the whole urethane set from British Parts Northwest.
>I
>also bought their 7/8" sway bar which was a deal at under 100 bucks.
>Its a perfect match (dimensionaly) as the stock bar with the exception
>of the diameter.
>
>I'm building an autocrosser (prepared) out of my 74 TR6 and I'm using
>
>early (70) drivetrain (spares).
>
>The whole package looks to be of good quality and this includes the
>diff
>mounts.
>
>Does anyone out there have any experience with British Parts Northwest
>urethane bush set for the whole suspension. I checked out the Nylatron
>stuff from TRF but its a bit pricey.
>
Glenn,
I've used BPNW's urethane bushings on two TR-6's, one not on the road
yet, the other about 4 years ago. So far, so good, although the trailing
arm bushes groan a bit.
Anyone in the Great Northwest been to BPNW?
Jim Davis
CF38690UO
CF37325U
|