Re: drive shaft bolts (TR6)

[ingate@shiseis.com (Shane F. Ingate)]

John,
        > What makes them special seems to be that the bolts
        > isn't threaded all the way down to the head, so that it fits tight in 
the
        > hole in the yoke (correct term?).

Cannot help you with your other questions, but these bolts are "shouldered",
and are the bolts you have to use.  I was suprized that they are not Grade 5.
In this application, it is the shear strength that is important, not torsional.
        Shane Ingate