triumphs
[Top] [All Lists]

Smog Check II requirements

To: triumphs@Autox.Team.Net
Subject: Smog Check II requirements
From: ingate@shiseis.com (Shane F. Ingate)
Date: Mon, 22 Sep 97 15:10:54 PDT
All,
        I found a very useful site on the web; The California
Bureau of Automotive Repair (BAR) at http://smogcheck.ca.gov/
(these are the guys who DONT want Gov. Wilson to sign SB42 into law).

Specifically, I direct you to the page at http://smogcheck.ca.gov/000019.htm
which has links to the emissions standards for the current (BAR-90)
requirements and post Dec 1, 1997 (BAR-97) requirements.

I may need some help in interpreting the tables for BAR-97, but it seems
to me that the test includes two "pulls" on the dyno, labelled
ASM 5015 and ASM 2525 (ASM = Acceleration Simulation Mode).  The
resulting emissions are combined into a formula that include the vehicles
test weight.  I attach the tables for 1971-1974 cars below.  Note that
there are two rows, A and B, such that the results of your tests
plus the columns of B divided by the test weight should be less than
the columns in A; ie

        A + B/VTW               where where VTW = Vehicle Test Weight

Tricky?  Take a moment to feel sorry for the poor guys having to
buy all this equipment and install it before the Dec 1 deadline.

I am not sure if this is the complete requirements of SMOG II, as the 
new equipment includes a 5-gas analyzer, so will be requirements on O2 
and CO2 which are not listed in the table.

The new equipment also includes a "gas tank cap sniffer".  Replace the seals
around your gas cap, folks!

For completeness, I include the standards for the current test
at the end (1971-1974 cars only). 

Am I interpreting the BAR-97 tables correctly?  Please tell me and
others if I am wrong!

        Shane Ingate in San Diego

***********************************************************************
>From http://smogcheck.ca.gov/000019.htm

Emission standards used to determine if a vehicle passes the 
emissions portion of the inspection -- a vehicle passes if the emission
levels are equal to or less than the standards for HC, CO, and/or 
NOx for ASM 5015 and ASM 2525.

BAR-97 (1971-1974 only)
=======================
                           Pass/Fail
                           =========
        ASM 5015                      ASM2525
      ------------------------------------------------------------
*     HC        CO       NOx          HC        CO        NOx          
A     235.4     2.56     1859.3       185.4     2.36      1659.3     
B     436041.7  4453.19  1703703.7    436041.7  4453.19   1703703.7


                         Gross Pollutor
                         ==============
     ASM 5015                         ASM 2525         
     --------------------------------------------------------------
*     HC        CO       NOx          HC        CO       NOx
A     435.4     4.3      2659.3       385.4     4.10     2459.3
B     436041.7  4453.19  1703703.7    436041.7  4453.19  1703703.7


Note: HC and NOx values are displayed in ppm and CO is displayed 
      in % CO pounds. 
* Pass/Fail Emission Standards and Gross Polluter Standards =  A + B/VTW
where VTW = Vehicle Test Weight

***********************************************************************
BAR-90 (1971-1974 only)
=======================
     Pass/Fail                            Gross Pollutor
     ----------------------------         ----------------------------
     Idle HC  CO     2500 HC  CO          Idle HC  CO     2500 HC  CO
          550 5.0         400 4.0              800 7.5         650 6.5
***********************************************************************

<Prev in Thread] Current Thread [Next in Thread>
  • Smog Check II requirements, Shane F. Ingate <=