Mr. Brown,
I had the same problem. I could not find those straps anywhere. So I
became creative. I removed the old clamps from the worn straps. (if
any are good). The ones I could not save, I made new ones from coat
hangers. Then I visited a fabric store (Joann's Fabric) and purchased
some simular straps. These new were a little different from the
originals, in that there were elastic. Come to think about it, it
worked better. Added more comforts to the seats.
Installation was an ease. Wrap the tip of new fabric around the old (or
made) clamps and stapled it together with a regular house-hold staple.
Make sure the staples are flat on both sides or you will be pulling them
out of your back. Then attach to the seat frame.
Good luck.
Craig Richburg
|