triumphs
[Top] [All Lists]

Re: About the engine questions

To: rick <rbacon@netcom.ca>
Subject: Re: About the engine questions
From: Brian Neuschwander <bwnbcg@sjm.infi.net>
Date: Mon, 26 Jan 1998 20:10:57 -0800
Cc: triumphs@Autox.Team.Net
Organization: New Millennium Management
References: <l03020900b0f306aaf74c@[207.181.92.106]>
Machine Shop Costs:

This was for a Spit 1500 this summer.

Crank ground, polished, nitrided:  $275

Balance flywheel, crank, pistons, rods, clutch  $100

Mill and Service Head and Valves:  $120

Bore Cyls: $85

Surface (2 step) Flywheel: $40

280 degree Piper Cam was about $100

Piston and Ring set was $200

Gaskets: $70

Bearings: $60

Seals: $25

Bolt on Gofast: $2500
-- 
Brian W. Neuschwander



<Prev in Thread] Current Thread [Next in Thread>