Andy,
I did the following to pass the test.
Gapped plugs to .035
Set points
Set timing to 10 degrees
Leaned carbs 1/2 turn
Syncronized carbs
Set idle to 1200
Crossed my fingers
Good luck,
Ron Olds
At 05:27 PM 7/24/98 -0400, you wrote:
>Hey, Hey, Hey, let's make the secrets public here.;-} Many of us got similar
>problems.
>Andy D.
>
>On 07/24/98 03:54 PM Ronald Olds said...
>>
>>Thanks to all who supplied information on how to pass my test. I finally
>>had time to go for a retest this morning and I passed (not by much)!. I'm
>>allowed 8.00% on my CO and I had 7.98%, close but good enough to pass.
>>At least I don't have to worry about it again for two years.
>>
>>Thanks again,
>>Ron Olds
>
|