In a message dated 30-Jul-99 09:01:27 Eastern Daylight Time,
gspens@interactivemediaworks.com writes:
> . . now the clutch is worse, I can't get her into any gear. I reblead
> the system, but no luck. My questions, 1)Is there a good way to get all
> the trapped air out of the slave? 2)If it isn't air in the system, what
> could I possibly have done to worsen the clutch simply by removing and
> rebuilding the master and slave? 3)How hard is it to drop the tranny if
> need be, and what am I looking for if the problem is actually in the
> tranny as opposed to the hydraulic system?
> I realize most everyone is at VTR, but any help would be
> appreciated. I'm sure there are a few of us unfortunate enough not to
> go ;~) .
>
Graham, did you change the hose between the master and the slave? If it is
soft when you squeeze it or wet then it is expanding under pressure and so
the clutch will not work. Cheers.
Art Kelly '64 TR4 CT 33118L
|