What car are you pertaining to? Any time you change shims, toe changes
also. Changing toe does not change the caster or camber though. If you take
an equal shim from the front or rear of the arm it only changes camber. If
you take just one out from the front or rear arm it will change caster and
camber. The changes you make to one side only affects that side. Changing
the camber that much will change your toe. It is best to get a shop that
can do the changes for you. Or if you live in the North Carolina area I can
do it. Hope you get things the way you want it.
Kevin Andrews
Siler City, NC
250's CD2908LO
CD7766L
----------
> From: Erik Bjorkner <autoxr@zebra.net>
> To: 'triumphs@autox.team.net'
> Subject: Alignment info
> Date: Thursday, September 16, 1999 3:11 PM
>
>
> If I remove equal number of shims (equal size that is) will my camber
> change equally between front and aft A-arm mount as well as between R & L
> sides? Will the toe change much say to go from 3 degrees neg to 1.5
> degrees neg camber?
>
> Thanks,
>
> Erik Bjorkner
> Mobile, AL
> http://www.geocities.com/MotorCity/Factory/3801/triumph.html
|