No, High. Sorry about that. The line up looks prefect, it's just an inch
high.
It's TS 57756 L
Thanks and sorry for the lack of clarity.
kg
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Musson, Carl
Sent: Thursday, September 30, 1999 11:24 PM
To: 'Ken Gano'; triumphs@autox.team.net
Subject: RE: TR3A picture needed
Are you saying that the bracket that is mounted on the inner wells is either
outboard or inboard to the corresponding cross piece on the apron?
Could there have been a change of placement at re-tooling? What is your
commish#?
Carl
-----Original Message-----
From: Ken Gano [mailto:triumphs@mcleodusa.net]
Sent: Friday, October 01, 1999 12:22 AM
To: triumphs@autox.team.net
Subject: TR3A picture needed
I spent the evening reinstalling the front apron. I feel
like I have a very
nice fit, except the front, top attachment points (where the
bowed piece of
square tubing bolts through the brackets on the inner fender
wells). There
is a full and uniform inch between the holes in the apron
and the holes in
the mounting brackets. Otherwise, it fit up fine and very
square.
Can anyone direct me towards a good picture. I am wondering
if there is
some sort of spacer in here I am missing. The closest
picture I can find is
page 23 of Piggott 1st edition and it appears to be as I
remember, that
being that the apron and the brackets bolt directly
together. My only other
option is to fit the hood and see how the curve looks, but a
picture could
save a lot of grief.
TIA
Ken Gano
|