It also helps to swap bleed screw and hose. Sometimes the hose rubs up
against the filter cartridge.
Bob Kramer
rgk@flash.net
----- Original Message -----
From: Dave Massey <105671.471@compuserve.com>
To: <Harrymague@aol.com>
Cc: TR List <triumphs@autox.team.net>
Sent: Thursday, February 10, 2000 7:19 AM
Subject: Spin On Oil Filter
>
> >Help. I got a spin oil filter for my TR6. The adapter fit great but
> theoil
> >filter does not fit. The clutch slave cylinder is in the way. am I
> missing
> >something??? I don't see how I can turn the adapter and get the oil
> filter
> >on. Any help would be appreciated.
> >
> >Thanks
> >
> >Harry
>
> Harry,
>
> I angled mine a little toward the front of the engine to just clear the
> front of
> the slave cylinder. Just loosen the bolt, swing the adapter until you can
> screw on a filter and position it where you want it and tighten the bolt.
> No worries.
>
> Dave
>
|