triumphs
[Top] [All Lists]

Re: Wheel cylinder to backing plate lube question.

To: "Drew Rogge" <drew@pixar.com>
Subject: Re: Wheel cylinder to backing plate lube question.
From: "Graham Stretch" <technical@iwnet.screaming.net>
Date: Thu, 9 Mar 2000 21:43:45 -0000charset="iso-8859-1"
Cc: "List Triumph" <triumphs@autox.team.net>
References: <10003091003.ZM869730@fangio>
Hi Drew
Copperslip is a high temperature anti seize compound that contains mashed up
copper (judging by its colour and texture) it is readily obtainable here in
the UK. There are similar products that are silver in colour reputed to do
the same thing, I have never tried them though.

Graham.

----- Original Message -----
From: Drew Rogge <drew@pixar.com>
To: <triumphs@autox.team.net>
Sent: Thursday, March 09, 2000 6:03 PM
Subject: Wheel cylinder to backing plate lube question.


>
>
> What do people use to lubricate the sliding fit between the brake
> slave cylinder and backing plate on the rear brakes of a TR3?
> So far I've seen suggestions to use Lubriplate, copperslip and
> to leave it dry because grease attracts dirt. Anyone have any
> other suggestions? And BTW, where do you get copperslip?
>
> Thanks,
> Drew
>
> --
> Drew Rogge
> drew@pixar.com


<Prev in Thread] Current Thread [Next in Thread>