From: email@example.com [mailto:firstname.lastname@example.org]On
Behalf Of David Moag
Sent: Friday, June 09, 2000 11:58 AM
To: Triumphs Mailing List
Subject: Attaching TR3 Cockpit/Door Cappings
Just a couple of quick questions on the installation of the various cockpit,
door and dash capping pieces.
1) Should I use adhesive on them as well as the screws?
I would not use adhesive. The screws will hold very well. Make sure you
have the correct screws and chrome washers. There are different sizes for
different parts of the interior.
2) What is the proper order for installing the rear door and cockpit
cappings. In looking at it, it seems the back rear one should go on first
and then work out towards the rear door cappings -- with the forward pieces
overlapping the rear pieces a bit if needed. Does that seem right?
You got it.
Paul g. Wiegman