triumphs
[Top] [All Lists]

brake and clutch system questions

To: Triumph List <triumphs@autox.team.net>, Spitfire List <spitfires@autox.team.net>
Subject: brake and clutch system questions
From: Reginald Tulk <regtulk@isd.net>
Date: Tue, 11 Jul 2000 00:41:44 -0500
As the '74 spit bit by bit becomes a whole car again, it is now time to
do the hydraulics.  I have rebuild kits for both the brake and clutch
parts (PO did a nice job of bead blasting them) and new lines from Nigel
at Spitbits.  I plan to use  DOT 5 fluid and am having the MN TRIUMPHS
club over this weekend to assist with the whole installation thing.  Any
of you who've been-there-done-that got any wisdom to share?

(A) put al the bits on the car and then flush everything out with
alcohol (or ???) then use the mityvac to get all the fluid where it
needs to be; (but I wonder about assembling the new masters and then
flushing them out.)
or (B)  Bench bleed the masters and then put them on the car - then
force fluid thru the lines and bleed off the wheel cylinders.
How important is it to flush the new lines out before putting brake
fluid in?

What does the list say?

Thanks

Reg Tulk
'74 Spit in a box


<Prev in Thread] Current Thread [Next in Thread>
  • brake and clutch system questions, Reginald Tulk <=