Easy (Easier) Snaps

["Taffel, Sherman" <STaffel@bcps.k12.md.us>]

I first ran into this challenge (stuck snaps) on the canvas covers in my
marine applications. I've found that liberal use of silicon spray or WD-40
or liq wrench helps to clean the corrosion or 'dirt' (the black stuff that
covers your fingers) and helps a whole lot in making them go on-come off
easier. 

However- the problem I then had for several months was that in periods of
'high  wind', the snaps would pop off easier.  So I recommend just using
enough 'lubricant/cleaner' to 'free up' the snap ring. 

Sherman

Sherman D. Taffel
Columbia, MD
TR4 CT40054L