For some time, I've been hearing an unusual clicking sound when
braking. The handyman who helps me with wrenching noticed that the right
inside disk brake pad was loose (wish my own noticer was more
sensitive). The pad slides forward and back about 1/8 to 1/4 " when simply
turning the disk. The two triangular plates that hold the pads in place
are snug, and no potential problems are obvious in my manuals.
If anyone has seen this before and/or can offer a suggestion about what
might be going on, before I begin dismantling the brakes, I would
appreciate it.
Thanks,
John Cowan
Forward this review to a friend. To subscribe, send email to:
jfcowan@pacbell.net. Check out previous reviews at:
http://home.pacbell.net/jfcowan
|