Bad pun,bad pun. Now go to the garage and rebuild a SU as punishment.
Larry
----- Original Message -----
From: "David Massey" <105671.471@compuserve.com>
To: "Bill & Skip Pugh" <anabil@caltel.com>
Cc: "[unknown]" <triumphs@autox.team.net>
Sent: Wednesday, January 10, 2001 8:04 AM
Subject: Dizzy Advance
>
> Message text written by Bill & Skip Pugh
> >This is probably a "duh" question to the list gurus, but is there any
> way to check if the vacuum advance is working properly on the Lucas
> Dizzy (57 TR3)??
> <
>
> Yes there is a method but it sucks.
>
> Seriously, you can check for a ruptured diaghram by attaching hose to the
> port and sucking on it. If you can continue to suck wind, er, air you
have
> a leak. I have pulled enough vacuum (yeah, I really suck) to affect the
> timing on my TR6 once. (I was younger then) But if you want to verify the
> advance curve you will need calibrated equipment.
>
> Good luck
>
> Dave Massey
> 57 TR3 TS18010
> 71 TR6
> 80 TR8
|