triumphs
[Top] [All Lists]

Re: TR4A front suspension

To: BDDesRoch@aol.com, triumphs@autox.team.net, vtr@autox.team.net
Subject: Re: TR4A front suspension
From: Herald948@aol.com
Date: Sat, 7 Apr 2001 20:25:07 EDT
I thought I'd toss this question out to the lists. Please make sure your 
reply goes to Dewey <BDDesRoch@aol.com>. Thanks!

--Andy

Andrew Mace, President, The Vintage Triumph Register
<www.vtr.org>
============

In a message dated 4/7/2001 6:51:42 PM Eastern Daylight Time, 
BDDesRoch@aol.com writes:


> Sir, This is a first time, front suspension repair job for me.(1966 TR4A) 
> With the repair kit came shackle pins for the lower, outer fulcrum. My 
> problem is that the original trunnion assembly/shackle pin appear to be one 
> piece and the pin is actually a bolt (a nut on one side only and bolt head 
> on 
> the other, just like the one in the repair kit). Now maybe due to age it 
> just 
> looks like one piece but I tried to press it (vice) and even applied a 
> little 
> hammer persuasion, to no avail. With the pin (bolt) affixed (or so it 
> appears) to the trunnion assembly I can't separate it from one side of the 
> wishbone. 
> 
> Please advise as I'm stumped. 
> 
> Dewey DesRochers 
> Battle Ground WA

///
///  triumphs@autox.team.net mailing list
///


<Prev in Thread] Current Thread [Next in Thread>
  • Re: TR4A front suspension, Herald948 <=