On Tue, May 22, 2001 at 02:15:16PM -0600, Lumia, John wrote:
>
> Dan Julien wrote:
>
> >After the seals arrived, I started with the pinion seal. The pinion flange
> >was easy enough to get off, but I noticed a groove had been worn on the
> >sealing surface, so figured I had better get a sleeve for it. After having
> >no luck a several parts stores, I decided to proceed to the axle seals -
> >after all, they might need sleeves, too.
>
> Where did you find these sleeves? Is this the fix for a leaking seal? I
> recently replaced the pinion seal and it helped but did not fix the problem
> totally. I still get a few drops from the pinion seal on the floor now and
> then.
I never did find any sleeves. The lack of sleeves and then the problem with
the axle flange is what ended up driving me to get professional help. There
was a thread on Speedi-Sleeves on the list a while back that had made me think
they would be easy to find.
--
Dan Julien
Austin, Texas
1970 TR6 CC50337L
dgjulien@swbell.net
///
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
///
|