Well, CCW or CW depends on which way you are looking at the nut. Perhaps an
easier way to remember is that it is 'normal' right-hand threads (ie it
moves like any other nut), and you position the nut lower to enrichen the
mixture (just like the 'choke' moves the jets). If you could get your head
under the carbs and look up at the nut, it would be CCW.
> The Service Manual says to enrich the mixture the jet adusting nut
> should be "unscrewed"...in my mind that is counter-clockwise, but I
> have this little nagging voice that says, "maybe it is clockwise".
> I promise to save the answer this time....
/// email@example.com mailing list
/// To unsubscribe send a plain text message to firstname.lastname@example.org
/// with nothing in it but
/// unsubscribe triumphs
/// or try http://www.team.net/cgi-bin/majorcool