triumphs
[Top] [All Lists]

Vacuum Advance and Pressure retard

To: Doug Mathews <mathews@uga.edu>
Subject: Vacuum Advance and Pressure retard
From: David Massey <105671.471@compuserve.com>
Date: Wed, 26 Sep 2001 13:23:26 -0400
Cc: "[unknown]" <triumphs@autox.team.net>
Message text written by Doug Mathews
>I had a 65 turbo charged Corvair, 164cu and 180hp....it would move very 
well when the turbo cut in.

It had a pressure retard to set the timing back under turbo
pressure.........

Anyone know if today's turbo vehicles use them or not? Just curious since 
there is so much electronics on todays cars I think you need to be an 
electrician and programmer to work on them!!!!
<

I had a 79 Mustang with the turbo 2.3 engine.  It had an electronic timing
retard unit that retarded the timing in steps in response to some pressure
switches so I think that timing retardation under boost is a necessary fact
of life.  (Perhaps you could get around it with water injection but that
really isn't practical in a street car.)

But you are right.  Most modern cars have spark timing under computer
control and if the car is boosted (turbo or super charged) then that is
just another parameter factored into the timing equation.

Dave

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>