Message text written by INTERNET:email@example.com
> Happy Thanks Giving to all that celabrate it.
Question to TR4 & TR4/A people: What is the stud size [diameter] &
thread for the 4 studs at the bottom of the exhaust manifold? [The part
that goes 'into the manifold' which conects the exhaust manifold to the
2 pipe section]. I belive that both ends are the same, but I don't have
any in now. TIA,<
And a happy Thanksgiving to you too.
I believe that the holes in the manifold are 3/8 UNC. The facotry fitted
studs that were 3/8-16 on both ends but if you go to the autoparts store
all you will find studs that are 3/8-16 on one end and 3/8-24 on the other.
These will work fine but you will have to use fine thread nuts which you
can get at the same time you buy your studs. Get brass ones.
I know for a fact that a VTR concours judge won't catch it and I doubt a
TRA judge will, either.
/// firstname.lastname@example.org mailing list
/// To unsubscribe send a plain text message to email@example.com
/// with nothing in it but
/// unsubscribe triumphs
/// or try http://www.team.net/cgi-bin/majorcool