You can get this adaptor at Napa auto parts.
If I recall it was between 10$ and 20$.
I used it to change a broken exhaust valve spring on my 6 on my 6 instead of
pulling the head.
Roger
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Brian Borgstede
Sent: Wednesday, August 27, 2003 8:49 AM
To: triumphs@autox.team.net
Subject: Not Good news
After you check the valve lash, you can get an adaptor at the local
autoparts
store that screws into the spark plug hole so you can inject air into the
cylinder.
Do this with that cylinder down and both valves closed. Find where the air
exits
the engine. I had a car with a breezeout the exhaust, that told me it was
the
exhaust valve.
>
>Looks like valves. First check valve lash. If that's OK then pull the
>head (which you'd have to do if you were doing rings anyway).
>
>Dave
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|