Re: TR3A bleeding procedures

["T. S. White" <tswrace@pacbell.net>]

Jim, I am afraid that you are not correct on the bleeding.  Your local
parts store or TRF sell a bench bleeding kit.  You simply drop a plastic
tube into a container of brake fluid to supply the master cylinder
during bleeding.  As a hint you can simplify things by removing the
master cylinders as a unit still attached to the mounting bracket by
undoing the lines and removing the mounting bracket.  Then bench bleed
both cylinders while they are still in the mounting bracket and replace
the unit in the car.
-- 
        Best Regards,
        Tom