Re: brake pipes to wheel cylinders

["T. S. White" <tswrace@pacbell.net>]

I have always used the tool I was taught to be correct for the square
plugs.  A 12" cresent wrench.

> I've mentioned this before, this seems like a good time to do it again ...
> don't use an open-end wrench or a 6 or 12 point socket or box end wrench to
> turn those square pipe plugs.  Get either a proper square box-end wrench
> (machinery supply houses sometimes have these) or an 8 point socket (got
> mine from Sears; Snap-On, Mac, etc. should have them too)

-- 
        Best regards,
        Tom