Dale:
I would also note that even though the manual states to lift the piston up a
1/4" to test the setting, this is not correct. It really should be more
like an 1/8".
Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3
-----Original Message-----
From: owner-triumphs@autox.team.net [mailto:owner-triumphs@autox.team.net]On
Behalf Of Graham Stretch
Sent: Saturday, April 24, 2004 8:06 PM
To: triumphs@autox.team.net
Subject: Re: Stromberg Problems
Hi Dale
Are these the top adjusting carbs, remove damper and go in from there or are
they bottom adjusting carbs, If top adjusting try turning anti clockwise to
richen the mixture, the principle is the needle and jet need to move further
apart to richen and it sounds like you have been winding the needle towards
the jet.
Graham.
|