triumphs
[Top] [All Lists]

Cam end float 6.27.0.6; VDF: 6.27.0.47; host: imx2.tcd.ie)

To: triumphs@autox.team.net
Subject: Cam end float 6.27.0.6; VDF: 6.27.0.47; host: imx2.tcd.ie)
From: John Gillis <jgillis@gemini.tcd.ie>
Date: Mon, 6 Sep 2004 09:55:24 +0100
I put the front plate and cam back in yesterday on the TR2 block. The 
workshop manual mentions measuring the endfloat, the tolerances are 
really wide .004 to.075, something like that. My question, if I am 
replacing the same cam and the same front bearing (I have a running 
in the block type) how can the end float, as I understand it, have 
changed?. My cam does move quit a bit forward and back, but when I 
put the cam wheel on does this mean the movement is restricted by the 
wheel bearing on the face of the front bearing ?.
On another note I used one of those thick black composite gaskets for 
the front plate, this visibly moves the plate forward, should I have 
used the paper type?.
Regards
John
-- 
John Gillis
1954 TR2 TS3618. October 1954 (ground up)
2001 Kawasaki W650
Trinity College
Dublin,
IRELAND.

Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8




<Prev in Thread] Current Thread [Next in Thread>