> Date: Sun, 17 Oct 2004 13:45:51 -0700
> From: "Doug M" <dougm1000@hotmail.com>
> Subject: brake/clutch master cylinders
>
> List:
>
> I am building my brake system for my TR3B frame-up restoration and I have a
> few different brake cylinders to choose from to rebuild and I seek your advice
> on what you know about these cylinders.
>
> I have a few brake/clutch master cylinders that are stamped Girling and have
> the numbers 310680. They have one pipe connector at 90 degrees and the other
> pipe connection at about a 45 degree angle. This design seems to be the shape
> of the current Moss and TRF master cylinders.
>
<snip>
>
> Thanks in advance.
>
> Doug
Hi Doug,
My '59 TR3A has the brake/clutch master cylinders with the 45 degree
connector and the number 310680. These cylinders are original to my car (as
far as I know). I hope this helps.
Dave Easton
'59 TR3
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|