triumphs
[Top] [All Lists]

Re: Fastening outer sills - TR2/3 (sorry for the confusion)

To: Angelo Graham <a3graham@admmail.uwaterloo.ca>
Subject: Re: Fastening outer sills - TR2/3 (sorry for the confusion)
From: Barry Schwartz <v6spitfireguy@cox.net>
Date: Wed, 01 Dec 2004 10:50:03 -0800
Cc: triumphs@Autox.Team.Net
Let me clarify that.  Plug welding is fine - I was referring to other
methods, such as rivets, screws, or bonding - welding be it plug, seam, or
spot is the method that is preferred over the others just mentioned -sorry
for the confusion - there is nothing wrong per say with other methods IF
DONE CORRECTLY, they would just not look as nice or as factory - If one
were to powder coat the panels prior to assembly, one of the methods, not
requiring welding would have to be used - 
****************************************
:
>Just looked at a post from Barry Schwartz offering some advice on fastening 
>outer sills to a TR3. Barry did not recommend using plug welds to do this. 
>
Barry Schwartz (San Diego)
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.802 / Virus Database: 545 - Release Date: 11/26/2004




<Prev in Thread] Current Thread [Next in Thread>