> Hey guys... Upon completing a 100 mile drive in my TR4 today, I noticed my
> clutch (which was replaced about 4000 miles ago) slipping. Could this in
> any way be a hydraulic related problem? The reason I ask is because the was
> the first long drive I'd taken the car on since replacing the hydraulic
> fluid in the clutch hydraulic system last weekend.
Sure, could be hydraulic. But I'd try adjusting the free play at the slave,
first. 4000 miles is a little soon, but they sometimes wear rapidly when first
installed.
If the problem is hydraulic, the fluid will spurt out when you crack open the
bleed valve on the slave. If it just dribbles, then most likely it's not a
hydraulic problem.
Randall
|