RE: Clutch not releasing

["Randall" <tr3driver@comcast.net>]

> I'm thinking out loud, so forgive me if I'm off base, but is it possible to
> mount the slave cylinder on the wrong side of the mounting bracket thingie?

It's probably possible, but I believe the correct location is the one that
requires the longest pushrod.  It's shown that way in the TR4 workshop manual
(which has the same slave components as TR3/A with Girling brakes).

Randall


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org