Re: [TR] TR6 steel wheels

["T. S. White" <tswrace@pacbell.net>]

pethier@isd.net wrote:
>>A good way to check wheels for warpage is to mount them on
>>a lathe and  rotate them with a dial indicator gauge
>>riding along the bead. 
> 
> 
> Since most of us don't have a lathe with a 16-inch throw
> lying around the shop, bolting the wheel to the front of a
> handy Triumph and giving it a spin seems to work fine.

Thats easy but then you have the runout in the bearings and hub to 
account for too.


-- 
        Best Regards,
        Tom


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org