> The problem is the 1" spigot handle
> opens very easily and if I need to adjust my carbs from underneath, it's
> inevitable that i'll accidentily brush against this valve and open it. It
> is in the closed position (on my car) when the 1" handle is pointing
> straight towards the right side of the car. Can I wrap it shut
> with a piece
> if wire or something?
Mine was too easy to turn also so I got a nice new shiny one. It leaked. Had
it replaced for free. That one leaked also. Enough of that. A simple plug
solved the problem!
[demime 1.01d removed an attachment of type application/ms-tnef which had a
name of winmail.dat]
=== This list supported in part by The Vintage Triumph Register