[TR] TR3A, setting the liners

triumphs

[TR] TR3A, setting the liners

To:	triumphs@autox.team.net
Subject:	[TR] TR3A, setting the liners
From:	Popnglo@aol.com
Date:	Thu, 13 Apr 2006 23:44:55 EDT

I'm ready to set the liners into the block. What torque should I set the 
liners in at, (100-105 ft lbs)?. I intend to use the studs, with large washer 
using the the old grudeon pins .

TIA Regards,
Ed (58 TR3A)


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TR] TR3A, setting the liners, Popnglo <= RE: [TR] TR3A, setting the liners, Dave Connitt Re: [TR] TR3A, setting the liners, Popnglo

Previous by Date:	RE: [TR] Gas Tank Mounting, Randall
Next by Date:	RE: [TR] TR3A, setting the liners, Dave Connitt
Previous by Thread:	[TR] Early tr4 seats, richhalpern
Next by Thread:	RE: [TR] TR3A, setting the liners, Dave Connitt
Indexes:	[Date] [Thread] [Top] [All Lists]