[TR] TR3 Rear Spring Spacers

["J. W. Baker Jr." <jwbakerjr@verizon.net>]

I am restoring a 1959 TR3A. After taking my rear springs off I noticed that
the one on the right side had 2 spacers that were the thickness of a leaf.
These spacers were on the upper side of the spring where it mounts to the axle
with the U-bolts.

I have another parts car and it has the same set-up. Did the cars come this
way or have these been added to compensate for a weak spring or leveling of
the car?

Thanks,

J.W.


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org