| To: | "Terry Smith" <terryrs@adelphia.net>, <triumphs@autox.team.net> |
|---|---|
| Subject: | RE: [TR] Harness TR3 |
| From: | "Randall" <tr3driver@comcast.net> |
| Date: | Wed, 21 Jun 2006 19:04:56 -0700 |
> One is from the wiper switch, If that is the correct explanation, then you have the wrong harness ! On a TR3A, there is no wire from the wiper switch to the fuse block, as the wiper switch grounds the terminal on the wiper motor. The diagrams that show a green wire to the wiper switch are for TR2 or early TR3, without self-parking wipers. Randall === This list supported in part by The Vintage Triumph Register === http://www.vtr.org |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [TR] TR3 steel wheel color, Mark |
|---|---|
| Next by Date: | Re: [TR] TR3 steel wheel color, fred thomas |
| Previous by Thread: | Re: [TR] Harness TR3, Geo & Kathleen Hahn |
| Next by Thread: | Re: [TR] Harness TR3, Dave1massey |
| Indexes: | [Date] [Thread] [Top] [All Lists] |