In a message dated 6/18/2007 10:48:15 AM Central Daylight Time,
> Has anyone got
> any suggestions here to keep the rear of my TR6 off the ground when it's
> heavily loaded like this? Are there any springs from a particular vendor
> you would recommend - or other solutions? By the way, my rear suspension
> just rebuilt with all new stock components - so it was in good but standard
> shape before the trip.
You could fit Ted's uprated springs. Not only are they of a higher spring
rate (won't compress as much under load) they are longer and will raise the
unladen ride height to that of a 76 model car. If you fit his front springs,
you can leave them in and not swap springs for the road trips.
=== This list supported in part by The Vintage Triumph Register