I know a Brit gear man in California (Stockton) who does a nice job, Duane
Carlson.. rebuilt my brother's TR4-A halfshaft for about $175 in a couple
weeks.. you can email him at:
duane247@comcast.net
regards,
Carl
'63 TR4 since '74
------------------------------------------------------------------------------
-----------------------
I was just about ready to get my 75 TR6 back on the road after a long and
expensive renovation and my Rt rear hub is making noise. The mechanic says it
needs new bearings. I believe this is a job left to experts, so I'm looking
for
recommendations for a rebuilder. I know that TRF rebuilds hubs, but their
turnaround time on the diff hubs they rebuilt for me was at least 2 months. I
would
like to get some use out of the car before the snow flies. Any suggestions?
Should I get both rebuilt? Can the other side be far behind? I don't think
it's
making noise yet.
Tom Miller
75 TR6
**************************************
Get a sneak peek of the all-new
AOL at http://discover.aol.com/memed/aolcom30tour
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|