Re: [TR] Autumn classic.-- now rear springs

["Randall" <tr3driver@ca.rr.com>]

> It wasn't  until the cut 
> off bolt had about 1/2 inch until the end that I could rotate 
> it in the  tube.

FWIW, there is supposed to be a tab on the frame that engages with the flat
of the 'bolt' head, to keep it from turning.   I missed it at first, but it
was obvious once the bolts/pins were out.

Randall
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs