> Hey TR folks - didn't TRIUMPH decide after developing the TR4
> to continue making the TR3a (due to popular demand) as a
> TR3b?
That part is kinda true.
> And wasn't that TR3b 4" wide r,
That part is not. The TR3B frame was the same width (interchangeable with)
the TR3A frame.
The factory did look at putting a TR3 body on a TR4 frame & rear axle. As I
recall, 3 prototypes were even built, and known as TR3-betas. But not the
same thing as a TR3B.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|